Description
The Disruptor Assisted Reset Trigger (FRT) from Partisan Triggers represents a modern approach to trigger design for the AR-15 platform, blending innovative mechanics with a focus on responsiveness and user experience. This product line is intended for shooters who want an alternative to standard single-stage or two-stage fire control systems, with an emphasis on reset behavior and trigger interaction.
Technical Specifications
- Tool steel and 4140 chromoly used on all wear surfaces for superior strength, durability, and long service life
- Trigger Pull Weight: 3.75 – 4.1lbs
- Compatible with most lowers; anti-walk pins recommended
- Requires a minimum H2 (recommend H3) carbine buffer weight for firearms with carbine extensions and 16” or shorter barrels, or a standard rifle buffer for 20” A2 stocks.
- Tested beyond 6,000 rounds under a course of fire derived from the USMC M27 IAR evaluation criteria
Legal in all 30+ Free American States (Sales prohibited to – CA, CT, CO (Boulder County and Broomfield), DE, FL, HI, IL, MA, MD, MN, NJ, NV, NY, RI, WA, Washington DC, Puerto Rico).
Your order will be canceled if you are ordering from one of these states.
Installation Steps – The Disruptor
Follow these steps for proper installation:
1. Remove any magazine and ensure the rifle and workspace are clear of ammunition.
2. Press pivot and takedown pins; separate upper and lower receivers.
3. Loosen the pistol grip screw. In most cases, it is not necessary to completely remove the pistol grip.
4. Remove the installed safety.
5. Remove hammer pin. Remove the hammer and hammer spring assembly.
6. Remove the trigger pin. Remove the trigger, sear and trigger spring assembly.
7. Insert the Partisan Trigger cartridge assembly.
8. Install your Partisan Trigger 3-position safety. Partisan Trigger safeties must be used in conjunction with the trigger. It may be necessary to use a small tool to depress the safety detent to get the safety installed fully.
9. Tighten pistol grip screw.
10. Install anti-rotation pins and apply thread locker.
11. Place the rear lug of the upper receiver into the lower, and slightly pull back on the charging handle to enable the rear of the bolt carrier group to clear the out of battery safety sear.
12. Reinsert pivot and takedown pins.
13. Installation complete.
Reviews
There are no reviews yet.